NuZar water system set, Q Lite produces ultrapure water (Type I water) from RO, distilled or deionized water. Quality of ultrapure water meets or exceeds ASTM, CLSI, CAP, and ISO Type I water standards. The NuZar water purification systems are compact and powerful. They are specifically designed for laboratories that demand a balance between cost of ownership and exceeding their purified water requirements. The system is CE/RoHS certified. RephiLe provides full documents support to meet user's GMP, GSP, GAP, GCP, GLP requirements. General Specifications Operating voltage 24 VDC Input voltage 100 – 240 VAC Main system power < 190 W Feed Water Requirements Feed water EDI water RO water Distilled water Deionized water Operating temperature 5 – 35 °C Feed water pressure 0 – 1 bar (0 – 15 psi)* Product Water Quality Ultrapure water dispensing rate Up to 2 L/min Ultrapure water resistivity (@25°C) 18.2 MΩ­·cm Ultrapure water TOC < 5 ppb** Particles in ultrapure water No Particles with size > 0.22 μm (with a 0.2 μm final filter or RephiBio filter) Microorganisms in ultrapure water < 0.001 cfu/ml (with a 0.2 μm final filter or RephiBio filter) Pyrogens (endotoxins) in ultrapure water < 0.001 Eu/ml (with a RephiBio filter) RNase in ultrapure water < 0.5 pg/ml (with a RephiBio filter) DNase in ultrapure water < 10 pg/ml (with a RephiBio filter) Dimensions Main system dimensionsWidth × depth × height 414 x 310 x 624 mm (16.3 x 12.2 x 24.5 in) Weight (Net approx) 18 kg Weight (Gross approx) 27 kg *It’s recommended to use a pressure regulator if feed water pressure is above 15 psi (1 bar) **When TOC Level of feed water is < 50 ppb.

Read more less

NuZar Q water system set, produces ultrapure water (Type I water) from RO, distilled or deionized water. Quality of ultrapure water meets or exceeds ASTM, CLSI, CAP, and ISO Type I water standards. The NuZar water purification systems are compact and powerful. They are specifically designed for laboratories that demand a balance between cost of ownership and exceeding their purified water requirements. The system is CE/RoHS certified. RephiLe provides full documents support to meet user's GMP, GSP, GAP, GCP, GLP requirements..   General Specifications Operating voltage 24 VDC Input voltage 100 – 240 VAC Main system power < 190 W Feed Water Requirements Feed water EDI water RO water Distilled water Deionized water Operating temperature 5 – 35 °C Feed water pressure 0 – 1 bar (0 – 15 psi)* Product Water Quality Ultrapure water dispensing rate Up to 2 L/min Ultrapure water resistivity (@25°C) 18.2 MΩ­·cm Ultrapure water TOC < 5 ppb** Particles in ultrapure water No Particles with size > 0.22 μm (with a 0.2 μm final filter or RephiBio filter) Microorganisms in ultrapure water < 0.001 cfu/ml (with a 0.2 μm final filter or RephiBio filter) Pyrogens (endotoxins) in ultrapure water < 0.001 Eu/ml (with a RephiBio filter) RNase in ultrapure water < 0.5 pg/ml (with a RephiBio filter) DNase in ultrapure water < 10 pg/ml (with a RephiBio filter) Dimensions Main system dimensionsWidth × depth × height 414 x 310 x 624 mm (16.3 x 12.2 x 24.5 in) Weight (Net approx) 18 kg Weight (Gross approx) 27 kg *It’s recommended to use a pressure regulator if feed water pressure is above 15 psi (1 bar) **When TOC Level of feed water is < 50 ppb. System includes: Main system UV preinstalled NuZar H and U Pack cartridges and a final filter

Read more less

NuZar water system set, R24 produces reverse osmosis (RO) water from tap water directly. It offers desired solutions for research professionals who work with varieties of applications utilizing RO pure water in the lab. The NuZar water purification systems are compact and powerful. They are specifically designed for laboratories that demand a balance between cost of ownership and exceeding their purified water requirements. The system is CE/RoHS certified. RephiLe provides full documents support to meet user’s GMP, GSP, GAP, GCP, GLP requirements. General Specifications Operating voltage 24 VDC Input voltage 100 – 240 VAC Main system power < 190 W Feed Water Requirements Feed water Tap water Feed water conductivity / TDS < 2000 μS/cm / < 1000 ppm Operating temperature 5 – 35 °C Feed water pressure 1 – 6 bar (15 – 90 psi) Product Water Quality RO production rate 24 L/hr RO water dispensing rate Up to 2 L/min RO water Conductivity  (@25°C) Typically < 20 μS/cm RO rejection 97 to 98% ionic rejection (new RO cartridge)   > 99% organic rejection > 99% particulates & bacteria rejection Dimensions & Weight  Main system dimensions Width × depth × height  w/ integrated tank 32 × 44 × 54 cm  (12.6 × 17.3 × 21.3 in) Weight (Approx Net) 19 kg Weight (Approx Gross) 28 kg

Read more less

NuZar RO Pack is designed to reduce most of the ions, organic carbons and particulates. Purification Technologies: Reverse Osmosis Technical Specifications: Burst pressure ≥20bar Flow rate  ≥16 L/min (Feed pressure ≥ 3.4 bar) ≥24 L/min (Feed pressure ≥ 3.4 bar) Height 393.8mm Diameter φ90mm   Suitable for water systems: NuZar water system set, U24 NuZar water system set, E10 NuZar water system set, H24 NuZar water system set, R24 NuZar water system set, C24

Read more less

NuZar U Light water system set, produces ultrapure water (Type I water) and RO water from tap water directly. Quality of ultrapure water meets or exceeds ASTM, CLSI, CAP, and ISO Type I water standards. The NuZar water purification systems are compact and powerful. They are specifically designed for laboratories that demand a balance between cost of ownership and exceeding their purified water requirements. The system is CE/RoHS certified. RephiLe provides full documents support to meet user's GMP, GSP, GAP, GCP, GLP requirements. General Specifications Operating voltage 24 VDC Input voltage 100 – 240 VAC Main system power < 190 W Feed Water Requirements Feed water Tap water Feed water conductivity / TDS < 2000 μS/cm/ < 1000 ppm Operating temperature 5 – 35 °C Feed water pressure 1 – 6 bar psi (15 – 90) Product Water Quality Ultrapure water dispensing rate Up to 2 L/min Ultrapure water resistivity (@25°C) 18.2 MΩ­·cm Ultrapure water TOC < 5 ppb* Particles in ultrapure water No Particles with size > 0.22 μm (with a 0.2 μm final filter or RephiBio filter) Microorganisms in ultrapure water < 0.001 cfu/ml (with a 0.2 μm final filter or RephiBio filter) Pyrogens (endotoxins) in ultrapure water < 0.001 Eu/ml (with a RephiBio filter) RNase in ultrapure water < 0.5 pg/ml (with a RephiBio filter) DNase in ultrapure water < 10 pg/ml (with a RephiBio filter) RO production rate 24 L/hr RO water dispensing rate Up to 2 L/min RO water conductivity  (@25°C) Typically < 20 μS/cm RO rejection 97 to 98% ionic rejection (new RO cartridge)> 99% organic rejection> 99% particulates & bacteria rejection Dimensions Main system dimensionsWidth × depth × height w/ 10L tank 491 x 422 x 624 mm (19.3 x 16.6 x 24.5 in) Main system dimensionsWidth × depth × height w/o 10L tank 491 x 310 x 624 mm (19.3 x 12.2 x 24.5 in) Dispenser dimensions Width × depth × height 21 × 29 × 61 cm (8.3 × 11.4 × 24.0 in) Weight (Net approx) 21 kg Weight (Gross approx) 30 kg *When TOC Level of feed water is < 50 ppb. System includes Main system RO membrane UV preinstalled NuZar P, H and U Pack cartridges and a 0.2 um final filter Cleaning Pack 10L tank and tank sanitization module preinstalled Tank vent filter RATANKVN1 Leak sensor

Read more less

NuZar U Pack is designed for NuZar water purification systems to remove ionic and organic contaminants below trace level to match the water quality required. Purification Technologies: Ion-exchange resins for removing trace level ionic contaminants Activated carbon for trace level of organic contaminants Technical Specifications: Burst pressure ≥20bar Flow rate  ≥2L/min (Feed pressure ≥ 2 bar) Height 393.8mm Diameter φ90mm   Suitable for water systems: NuZar water system set, U24 NuZar water system set, Q

Read more less

NuZar U24 water system set, produces ultrapure water (Type I water) and RO water from tap water directly. Quality of ultrapure water meets or exceeds ASTM, CLSI, CAP, and ISO Type I water standards. The NuZar water purification systems are compact and powerful. They are specifically designed for laboratories that demand a balance between cost of ownership and exceeding their purified water requirements. The system is CE/RoHS certified. RephiLe provides full documents support to meet user’s GMP, GSP, GAP, GCP, GLP requirements. General Specifications Operating voltage 24 VDC Input voltage 100 – 240 VAC Main system power < 190 W Feed Water Requirements Feed water Tap water Feed water conductivity / TDS < 2000 μS/cm/ < 1000 ppm Operating temperature 5 – 35 °C Feed water pressure 1 – 6 bar psi (15 – 90) Product Water Quality Ultrapure water dispensing rate Up to 2 L/min Ultrapure water resistivity (@25°C) 18.2 MΩ­·cm Ultrapure water TOC < 5 ppb* Particles in ultrapure water No Particles with size > 0.22 μm (with a 0.2 μm final filter or RephiBio filter) Microorganisms in ultrapure water < 0.001 cfu/ml (with a 0.2 μm final filter or RephiBio filter) Pyrogens (endotoxins) in ultrapure water < 0.001 Eu/ml (with a RephiBio filter) RNase in ultrapure water < 0.5 pg/ml (with a RephiBio filter) DNase in ultrapure water < 10 pg/ml (with a RephiBio filter) RO production rate 24L/hr RO water dispensing rate Up to 2 L/min RO water conductivity  (@25°C) Typically < 20 μS/cm RO rejection 97 to 98% ionic rejection (new RO cartridge)> 99% organic rejection> 99% particulates & bacteria rejection Dimensions Main system dimensionsWidth × depth × height w/ 10L tank 491 x 422 x 624 mm (19.3 x 16.6 x 24.5 in) Main system dimensionsWidth × depth × height w/o 10L tank 491 x 310 x 624 mm (19.3 x 12.2 x 24.5 in) Dispenser dimensions Width × depth × height 21 × 29 × 61 cm (8.3 × 11.4 × 24.0 in) Weight (Net approx) 21 kg Weight (Gross approx) 30 kg *When TOC Level of feed water is < 50 ppb. System includes Main system RO membrane UV preinstalled NuZar P, H and U Pack cartridges and a 0.2 um final filter Cleaning Pack 10L tank preinstalled Tank vent filter RATANKVN7 Leak sensor

Read more less

OLEFINFILM SM996 Flexible sealing film comprising a proprietary blend of waxes and polyolefins. OLEFINFILM is highly resistant to water, moisture loss and moisture absorption, yet is permeable to oxygen and carbon dioxide. SM996 sealing film stretches more than 350% of its original length and is self-sealing, allowing it to cling around irregular shapes and surfaces. These unique properties make it ideal for protecting the contents of test tubes, flasks, beakers, and Petri dishes as well as an overwrap to further secure stoppers, lids and caps. Effects of common reagents SM996 sealing film is resistant to many polar substances such as strong acids and alkalis for up to 48 hours. After this period, some brittleness may occur. It is not recommended for use with chlorinated or non-polar aliphatic or aromatic solvents. Storage Conditions Temperatures of 45 °F to 90 °F (7 °C to 32 °C) and relative humidity of 35 % to 55 % are desirable. Avoid extremes of heat and cold. Store products in a cool, dry, clean environment; store several inches off the floor. Protect products from direct sunlight, heat, moisture, and keep in original container until ready for use. 4IN. x 125FT. per roll  

Read more less

One-Step RT-PCR Kit provides reverse transcription and subsequent PCR in the same reaction tube, eliminating the need to change buffers and reducing the risk of contamination. This kit offers the end-user an easy alternative to the conventional “two-step” RT-PCR approach with extreme sensitivity, specificity and high product yield.  Composition:  DNA polymerase (5U/µl), 25µl PowerScript™ Reverse Trascriptase (200U/µl), 25µl 2xOne-Step RT-PCR Buffer, 1ml Applications Gene-expression analysis Transcription analysis Gene cloning Multiplex RT-PCR High throughput applications Virus detection and quantification

Read more less

The Optical 384-Well qPCR plate is designed to provide high temperature accuracy and uniformity for efficient, oil-free PCR amplification. This plate is designed to work with ABI's 384-well Real-Time PCR systems and thermal cyclers. Frosted to minimize interfering fluorescence from wells of cycling block Screened to eliminate auto-fluorescent plates Unique design provides a barrier to ambient air to help ensure well-to-well temperature uniformity DNA, RNase and PCR inhibitor free Compatible with: 3130, 3130xl Genetic Analyzer  3500, 3500xL, 3500Dx Genetic Analyzer  3730, 3730xl DNA Analyzer, 7900HT System GeneAmp 9700 QuantStudio™, QuantStudio™ Dx Veriti Dx Thermal Cycler Veriti Thermal Cycler ViiA™ 7, ViiA™ 7Dx System  

Read more less

The Optical 384-Well qPCR plate is designed to provide high temperature accuracy and uniformity for efficient, oil-free PCR amplification. This plate is designed to work with Bio-Rad's 384-well Real-Time PCR systems and thermal cyclers. Frosted to minimize interfering fluorescence from wells of cycling block Screened to eliminate auto-fluorescent plates Unique design provides a barrier to ambient air to help ensure well-to-well temperature uniformity DNA, RNase and PCR inhibitor free Compatible with: CFX384 TouchTM  

Read more less

The Optical 384-Well qPCR plate is designed to provide high temperature accuracy and uniformity for efficient, oil-free PCR amplification. This plate is designed to work with ABI's 384-well Real-Time PCR systems and thermal cyclers. Frosted to minimize interfering fluorescence from wells of cycling block Screened to eliminate auto-fluorescent plates Unique design provides a barrier to ambient air to help ensure well-to-well temperature uniformity DNA, RNase and PCR inhibitor free Compatible with: 3130, 3130xl Genetic Analyzer  3500, 3500xL, 3500Dx Genetic Analyzer  3730, 3730xl DNA Analyzer, 7900HT System GeneAmp 9700 QuantStudio™, QuantStudio™ Dx Veriti Dx Thermal Cycler Veriti Thermal Cycler ViiA™ 7, ViiA™ 7Dx System  

Read more less