This is a 0.2 μm PES membrane filters designed for the removal of particles and microorganisms from liquids. Membrane is US made. Every filter is integrity tested.
Specifications
| Membrane |
PES |
| Pleat Support |
Polyester |
| Shell, Cage, Core, End Caps |
Polypropylene |
| Nominal Dimensions |
Lengths: 117 mm (4.6") without fittings
Diameter: 55 mm (2.2")
|
| Effective Filtration Area |
200 cm2
|
| Pore Size Rating |
0.2 μm |
| Minimum Bubble Point |
2.5 bar (36 psi) in water |
| Maximum Operating Pressure |
4 bar (60 psi) at 25°C |
Suitable for the following Millipore Systems:
Disclaimer third parties: All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. All specifications are subject to change without notice. MILLIPORE, MILLI-Q, DIRECT-Q, SIMPLICITY, SYNERGY and ELIX are trademarks of Merck KGaA, Darmstadt Germany.
