Type I grade water, also known as Ultrapure Water, is the purest form of water to be produced. It’s used for the most critical applications and advanced analytical procedures.This includes:
Cell and Tissue Cultures
Liquid Chromatography, including High Performance Liquid Chromatography (HPLC)
Gas Chromatography
Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
Molecular Biology
Type I can also be used in applications that require Type II water. This is quite a common practice that can help to avoid the generation of by-products during applications.
Type I grade water, also known as Ultrapure Water, is the purest form of water to be produced. It’s used for the most critical applications and advanced analytical procedures. This includes:
Cell and Tissue Cultures
Liquid Chromatography, including High Performance Liquid Chromatography (HPLC)
Gas Chromatography
Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
Molecular Biology
Type I can also be used in applications that require Type II water. This is quite a common practice that can help to avoid the generation of by-products during applications.
Type I grade water, also known as Ultrapure Water, is the purest form of water to be produced. It’s used for the most critical applications and advanced analytical procedures.This includes:
Cell and Tissue Cultures
Liquid Chromatography, including High Performance Liquid Chromatography (HPLC)
Gas Chromatography
Inductively Coupled Plasma Mass Spectrometry (ICP-MS)
Molecular Biology
Type I can also be used in applications that require Type II water. This is quite a common practice that can help to avoid the generation of by-products during applications.
The Ultrasense Pico Western Substrate, as a luminol-based enhanced chemiluminescent substrate, is sensitive and compatible with conducting immunoblots with horseradish peroxidase (HRP) – conjugated secondary antibodies. The low picogram to mid femtogram detection of antigen is enabled by Ultrasense Pico Ultra Western Substrate’s excellent sensitivity and long signal duration. Further, its long chemiluminescent signal duration makes both digital and film-based imaging possible without any loss of the signal. Appropriate primary and secondary antibody dilutions are suggested for attaining optimal signal intensity and duratio
Features:
No optimization required. Switching to the Ultrasense Pico Western Substrate from other brands, such as Thermo Scientific™ SuperSignal™ West Dura and Millipore™ Immobilon™ substrates, does not require optimization or protocol changes.
High degree of sensitivity and enhanced chemiluminescence duration. UltraSense Pico Western Substrate enables an accurate low picogram to mid femtogram detection of protein on the same immunoblot after a single exposure.
Optimized for use with PVDF and nitrocellulose membranes
Compatible with Western Blotting Markers
Optimized for film- and CCD-based imaging.
Chemiluminescent development
Keep the membrane moist in the wash buffer while preparing the substrate mixture. Make sure the membrane does not dry out in the next steps.
The chemiluminescent substrate solution is sufficiently stirred to prepare the 0.1ml of solution / cm2 of the membrane.
For a small membrane (7 x 8.5 cm), 4 ml of solution is sufficient.
For a medium-sized membrane (8.5 x 135 cm), 10 ml of solution is sufficient.
Place the membrane on a clean, flat surface or in a clean container.
Remove the membrane from the chemiluminescent substrate solution and drain the excess solution.
Place the membrane in a plastic sheet protector or plastic wrap to prevent the film from drying out.
Imaging the membrane with a digital imager or by exposure to the X-ray film.
The Ultrasense Pico Western Substrate, as a luminol-based enhanced chemiluminescent substrate, is sensitive and compatible with conducting immunoblots with horseradish peroxidase (HRP) – conjugated secondary antibodies. The low picogram to mid femtogram detection of antigen is enabled by Ultrasense Pico Ultra Western Substrate’s excellent sensitivity and long signal duration. Further, its long chemiluminescent signal duration makes both digital and film-based imaging possible without any loss of the signal. Appropriate primary and secondary antibody dilutions are suggested for attaining optimal signal intensity and duratio
Features:
No optimization required. Switching to the Ultrasense Pico Western Substrate from other brands, such as Thermo Scientific™ SuperSignal™ West Dura and Millipore™ Immobilon™ substrates, does not require optimization or protocol changes.
High degree of sensitivity and enhanced chemiluminescence duration. UltraSense Pico Western Substrate enables an accurate low picogram to mid femtogram detection of protein on the same immunoblot after a single exposure.
Optimized for use with PVDF and nitrocellulose membranes
Compatible with Western Blotting Markers
Optimized for film- and CCD-based imaging.
Chemiluminescent development
Keep the membrane moist in the wash buffer while preparing the substrate mixture. Make sure the membrane does not dry out in the next steps.
The chemiluminescent substrate solution is sufficiently stirred to prepare the 0.1ml of solution / cm2 of the membrane.
For a small membrane (7 x 8.5 cm), 4 ml of solution is sufficient.
For a medium-sized membrane (8.5 x 135 cm), 10 ml of solution is sufficient.
Place the membrane on a clean, flat surface or in a clean container.
Remove the membrane from the chemiluminescent substrate solution and drain the excess solution.
Place the membrane in a plastic sheet protector or plastic wrap to prevent the film from drying out.
Imaging the membrane with a digital imager or by exposure to the X-ray film.
Universal compatibilityAll barrier tips could fit many popular brands of pipettes, such as EPPENDORF, GILSON, FINNPIPETTE, EXCALIBER, NICHIRYO, SOCOREX, VOLAC, and etc. Both single channel and multichannel pipette (8 channel or 12 channel).
Features
All the filter tips are made of virgin and special polypropylene, it ensures tips autoclavable up to 121°C.
The low adhension of the tips could save precious sample for researcher.
All our barrier tips are pre-sterilized, DNase and RNase free, No human DNA, Non-pyroygenic
The long reach design could avoid cross contamination much better.
Universal compatibilityAll barrier tips could fit many popular brands of pipettes, such as EPPENDORF, GILSON, FINNPIPETTE, EXCALIBER, NICHIRYO, SOCOREX, VOLAC, and etc. Both single channel and multichannel pipette (8 channel or 12 channel).
Features
All the filter tips are made of virgin and special polypropylene, it ensures tips autoclavable up to 121°C.
The low adhension of the tips could save precious sample for researcher.
All our barrier tips are pre-sterilized, DNase and RNase free, No human DNA, Non-pyroygenic
The long reach design could avoid cross contamination much better.
Also called 1000ul Filter Tips with extended length
Universal compatibilityAll barrier tips could fit many popular brands of pipettes, such as EPPENDORF, GILSON, FINNPIPETTE, EXCALIBER, NICHIRYO, SOCOREX, VOLAC, and etc. Both single channel and multichannel pipette (8 channel or 12 channel).
Features
All the filter tips are made of virgin and special polypropylene, it ensures tips autoclavable up to 121°C.
The low adhension of the tips could save precious sample for researcher.
All our barrier tips are pre-sterilized, DNase and RNase free, No human DNA, Non-pyroygenic
The long reach design could avoid cross contamination much better.
Universal compatibilityAll barrier tips could fit many popular brands of pipettes, such as EPPENDORF, GILSON, FINNPIPETTE, EXCALIBER, NICHIRYO, SOCOREX, VOLAC, and etc. Both single channel and multichannel pipette (8 channel or 12 channel).
Features
All the filter tips are made of virgin and special polypropylene, it ensures tips autoclavable up to 121°C.
The low adhension of the tips could save precious sample for researcher.
All our barrier tips are pre-sterilized, DNase and RNase free, No human DNA, Non-pyroygenic
The long reach design could avoid cross contamination much better.
Universal compatibilityAll barrier tips could fit many popular brands of pipettes, such as EPPENDORF, GILSON, FINNPIPETTE, EXCALIBER, NICHIRYO, SOCOREX, VOLAC, and etc. Both single channel and multichannel pipette (8 channel or 12 channel).
Features
All the filter tips are made of virgin and special polypropylene, it ensures tips autoclavable up to 121°C.
The low adhension of the tips could save precious sample for researcher.
All our barrier tips are pre-sterilized, DNase and RNase free, No human DNA, Non-pyroygenic
The long reach design could avoid cross contamination much better.
Universal compatibilityAll barrier tips could fit many popular brands of pipettes, such as EPPENDORF, GILSON, FINNPIPETTE, EXCALIBER, NICHIRYO, SOCOREX, VOLAC, and etc. Both single channel and multichannel pipette (8 channel or 12 channel).
Features
All the filter tips are made of virgin and special polypropylene, it ensures tips autoclavable up to 121°C.
The low adhension of the tips could save precious sample for researcher.
All our barrier tips are pre-sterilized, DNase and RNase free, No human DNA, Non-pyroygenic
The long reach design could avoid cross contamination much better.
Operating Temperature -40~120°C
Real-Time PCR(qPCR) use
Strong pressure sensitive silicone adhesive
Ultra clear membrane show consistent and high light transmitting rate provide stable date than others
Free of DNase, RNase, DNA, PCR Inhibitor, ATP, Endotoxin. All products are ready to use in qPCR
Evaporation rate below 5%, saving cost on reagents
Small package can avoid contamination by different researcher
