Genie P Pack is designed to remove particles, organic compounds and free chlorine from tap water. This protects the reverse osmosis (RO) membrane against mineral scaling, organic fouling and chlorine oxidation. Purification Technologies:  Polyphosphate for anti-scaling protection Activated carbon for free chlorine reduction and bacteriostatic protection Depth-filtration for particles removal Technical Specifications: Burst pressure ≥20bar Flow rate  ≥2L/min（Feed pressure ≥ 2 bar） Height 393.8mm Diameter φ90mm   Suitable for Genie water systems: Genie G Genie U Genie A Genie E Genie R

Read more less

Genie P Pack is designed to remove particles, organic compounds and free chlorine from tap water. This protects the reverse osmosis (RO) membrane against mineral scaling, organic fouling and chlorine oxidation. Purification Technologies:  Polyphosphate for anti-scaling protection Activated carbon for free chlorine reduction and bacteriostatic protection Depth-filtration for particles removal Technical Specifications: Burst pressure ≥20bar Flow rate  ≥2L/min（Feed pressure ≥ 2 bar） Height 393.8mm Diameter φ90mm   Suitable for Genie water systems: Genie G Genie U Genie A Genie E Genie R

Read more less

Genie PURIST Set Feed: purified water Product: Type I Water System includes  Main system  Control Console  One Dispenser  UV preinstalled  Two cartridges and a final filter   Feed Water Requirements Pure water EDI water, RO water, Distilled water, Deionized water Operating temperature 5 – 35 ℃ Feed water pressure 0 – 1 bar (0 – 15 psi) Product Water Quality Ultrapure water dispensing rate Up to 2.0 L/min Ultrapure water resistivity (@ 25℃) 18.2 MΩ·cm Ultrapure water TOC* < 2 ppb Particles in ultrapure water ( > 0.2 μm) No particles (with a 0.2 μm final filter or RephiBio filter Microorganisms in ultrapure water < 0.001 cfu/ml (with a 0.2 μm final filter or RephiBio filter) Pyrogens (endotoxins) in ultrapure water < 0.001 Eu/ml (with a RephiBio filter) RNase in ultrapure water < 0.5 pg/ml (with a RephiBio filter) DNase in ultrapure water <10 pg/ml (with a RephiBio filter) Dimensions   Main system dimensionsWidth × depth × height   32 × 44 × 54 cm (12.6 × 17.3 × 21.3 in) Dispenser dimensions Width × depth × height 21 × 29 × 61 cm (8.3 × 11.4 × 24.0 in) Weight 17 kg Input Voltage 110 – 240 VAC Operating Voltage 24 VDC Main system power < 200 W *In the appropriate operating conditions, otherwise typically ≤5 ppb.

Read more less

Genie R Set Feed: tap water Product: RO Water System includes  Main system  Control Console  Genie Cleaning Pack  30L tank and vent filter  Two cartridges  Leak protector Dispensers are optional Feed Water Requirements Tap Water Municipal water, Conductivity < 2000 μS/cm (1000 ppm) Operating temperature 5 – 35 ℃ Feed water pressure 1 – 6 bar psi (15 – 90) Water Flow Rate RO water production rate (@ 25℃) 12, 24 and 32 L/hr Water dispensing rate Up to 2.0 L/min Product Water Quality Water conductivity (@ 25℃) typically < 20 μS/cm (feed water conductivity < 500 μS/cm) RO rejection 97 to 98% ionic rejection (new RO cartridge)> 99% organic rejection> 99% particulates & bacteria rejection Product Water Quality Stored in Tank ( for tank recirculation models ) Resistivity (＠25℃) > 1 MΩ·cm (default), adjustable Dimensions Main system dimensions Width × depth × height   32 × 44 × 54 cm (12.6 × 17.3 × 21.3 in) Dispenser dimensions Width × depth × height 21 × 29 × 61 cm (8.3 × 11.4 × 24.0 in) Weight 20 kg Input Voltage 110 – 240 VAC Operating Voltage 24 VDC Main system power < 200 W *Product water quality may vary due to local feed water conditions.

Read more less

Genie RO Pack is designed to reduce most of the ions, organic carbons and particulates. Technical Specifications:  Burst pressure ≥20 bar Flow rate  ≥12L/min (Feed pressure ≥ 2 bar) Height 393.8mm Diameter φ90mm   Purification Technologies Reverse Osmosis Suitable for Genie water systems: Genie G Genie U Genie A Genie E Genie R

Read more less

Suitable for the following Rephile System: Genie G5/G10 Genie U12/U24 Genie E5/E10 Genie R12/R24

Read more less

Genie RO Pack is designed to reduce most of the ions, organic carbons and particulates. Technical Specifications:  Burst pressure ≥20bar Flow rate  ≥16L/min（Feed pressure ≥ 3.4 bar） Height 393.8mm Diameter φ90mm Purification Technologies Reverse Osmosis Suitable for Genie water systems: Genie G15 Genie U32 Genie A Genie E15 Genie R32

Read more less

Suitable for the following Rephile System: Genie U Genie E Genie R for tank recirculation

Read more less

Genie U Pack is designed for removing ionic and organic contaminants below trace level to match the water quality required for your application. Purification Technologies:  Ion-exchange resins for removing trace level ionic contaminants Activated carbon for trace level of organic contaminants Technical Specifications Burst pressure ≥20bar Flow rate  ≥2L/min（Feed pressure ≥ 2 bar） Height 393.8mm Diameter φ90mm Dynamic capacity ≥30 gNaCl   Suitable for Genie water systems: Genie G Genie U Genie A Genie PURIST

Read more less

Genie U Pack is designed for removing ionic and organic contaminants below trace level to match the water quality required for your application. Purification Technologies:  Ion-exchange resins for removing trace level ionic contaminants Activated carbon for trace level of organic contaminants Technical Specifications: Burst pressure ≥20bar Flow rate  ≥2L/min（Feed pressure ≥ 2 bar） Height 393.8mm Diameter φ90mm Dynamic Capacity ≥30 gNaCl   Suitable for Genie water systems: Genie G Genie U Genie A Genie PURIST

Read more less

Genie U Pack is designed for removing ionic and organic contaminants below trace level to match the water quality required for your application. Purification Technologies:  Ion-exchange resins for removing trace level ionic contaminants Activated carbon for trace level of organic contaminants Technical Specifications: Burst pressure ≥20 bar Flow rate  ≥2L/min（Feed pressure ≥ 2 bar） Height 393.8mm Diameter φ90mm Dynamic capacity ≥30 gNaCl   Suitable for Genie water systems: Genie G Genie U Genie A Genie PURIST

Read more less

Genie U Set Feed: tap water Product: Type I and RO Water System includes Main system Control Console One Dispenser RO membrane(s) Four cartridges and a final filter 30L tank Leak protector More dispensers optional Feed Water Requirements Tap Water Municipal water, Conductivity < 2000 μS/cm (1000 ppm) Operating temperature 5 – 35 ℃ Feed water pressure 1 – 6 bar (15 – 90 psi) Water Flow Rate RO water production rate (@ 25℃) 12, 24, 32 L/hr RO water dispensing rate Up to 2.0 L/min Ultrapure water dispensing rate Up to 2.0 L/min Product Water Quality RO water conductivity (@ 25℃) typically < 20 μS/cm (feed water conductivity < 500 μS/cm) RO rejection 97 to 98% ionic rejection (new RO cartridge)> 99% organic rejection> 99% particulates & bacteria rejection Ultrapure water resistivity (@ 25℃) 18.2 MΩ·cm Ultrapure water TOC* < 2 ppb Particles in ultrapure water ( > 0.2 μm) No particles (with a 0.2 μm final filter or RephiBio filter) Microorganisms in ultrapure water < 0.001 cfu/ml (with a 0.2 μm final filter or RephiBio filter) Pyrogens (endotoxins) in ultrapure water < 0.001 Eu/ml (with a RephiBio filter) RNase in ultrapure water < 0.5 pg/ml (with a RephiBio filter) DNase in ultrapure water <10 pg/ml (with a RephiBio filter) Product Water Quality Stored in Tank ( for tank recirculation models ) Resistivity (＠25℃) > 1 MΩ·cm (default), adjustable Dimensions Main system dimensions Width × depth × height 32 × 44 × 54 cm (12.6 × 17.3 × 21.3 in) Dispenser dimensions Width × depth × height 21 × 29 × 61 cm (8.3 × 11.4 × 24.0 in) Weight 20 kg Input Voltage 110 – 240 VAC Operating Voltage < 200 W *In the appropriate operating conditions, otherwise typically ≤5 ppb.

Read more less