The siRNA oligo can be labeled in the four different ends of double stranded by multiple markers. The labeled siRNA can be observed by flow cytometry, fluorescence microscopy, and laser scanning confocal microscope, which can determine whether the transfection is effective, and optimize transfection conditions. The labeled siRNA can also be used in siRNA intracellular localization and double labeling experiments (with labeled antibody) to track those siRNA transfected cells, then the reduction of target protein expression will be integrated with the transfection. Labeling of the anti-sense 5’ end will influence the gene silencing activity, so labeling of this site is not recommended. Modification of any of other three ends has no influence on silencing activity. We recommend to modifying the 5’ end of sense strand, which is the best recognized chemical labeling locus. Fluorescence-label includes 5'-FAM (green), 5'-Cy3 (red) and 3'-Cy3 (red). The labeled siRNA oligos are in double stranded form (duplex), and purified by HPLC. 1 OD=2.5-3 nmol Shipping cost for all siNRA orders is $30.  

Read more less

EasyPrep™ Fungal gDNA Miniprep Kits allow rapid and reliable isolation of high-quality total cellular DNA from a wide variety of Fungal species and tissues. Up to 100mg of wet tissue (or up to 50 mg dry tissue) can be processed in less than 1 hour. The system combines the reversible nucleic acid-binding properties of Bioland’s matrix with the speed and versatility of spin column technology to eliminate polysaccharides, phenolic compounds, and enzyme inhibitors from fungal tissue lysates. Purified DNA is suitable for PCR, restriction digestion, and hybridization techniques. There are no organic extractions thus reducing plastic waste and hands-on time to allow multiple samples to be processed in parallel. Storage and Stability All components of the EasyPrep™ Fungal DNA Miniprep Kit are stable for at least 12 months from date of purchase when stored at 22°C-25°C. During shipment or storage in cool ambient conditions, precipitates may form in Buffer FG 3. It is possible to dissolve such deposits by warming the solution at 37°C. Kit's Contents SKU GD06-01 GD06-02 DNA Columns 50 250 Collection Tubes 100 500 Buffer FG1 40 mL 180 mL Buffer FG2 12mL 50 mL Buffer FG3 15mL 200 mL Buffer CFG1 30 mL 130 mL DNA Wash Buffer 12 mL 54 mL Elution Buffer 15 mL 50 mL RNase A 100 μL 500 μL Manual 1 1  

Read more less

EasyPrep™ Fungal gDNA Miniprep Kits allow rapid and reliable isolation of high-quality total cellular DNA from a wide variety of Fungal species and tissues. Up to 100mg of wet tissue (or up to 50 mg dry tissue) can be processed in less than 1 hour. The system combines the reversible nucleic acid-binding properties of Bioland’s matrix with the speed and versatility of spin column technology to eliminate polysaccharides, phenolic compounds, and enzyme inhibitors from fungal tissue lysates. Purified DNA is suitable for PCR, restriction digestion, and hybridization techniques. There are no organic extractions thus reducing plastic waste and hands-on time to allow multiple samples to be processed in parallel. Storage and Stability All components of the EasyPrep™ Fungal DNA Miniprep Kit are stable for at least 12 months from date of purchase when stored at 22°C-25°C. During shipment or storage in cool ambient conditions, precipitates may form in Buffer FG 3. It is possible to dissolve such deposits by warming the solution at 37°C. Kit's Contents SKU GD06-01 GD06-02 DNA Columns 50 250 Collection Tubes 100 500 Buffer FG1 40 mL 180 mL Buffer FG2 12mL 50 mL Buffer FG3 15mL 200 mL Buffer CFG1 30 mL 130 mL DNA Wash Buffer 12 mL 54 mL Elution Buffer 15 mL 50 mL RNase A 100 μL 500 μL Manual 1 1  

Read more less

Extracting and purification of DNA fragment from agarose gels or enzymatic reactions (such as PCR). Kit Contents: SKU DC01-01 DC01-02 DNA mini Columns 50 250 Buffer GB* 30 ml 130 ml DNA Wash Buffer (Concentrate) 12 ml 54 ml Column Buffer 6 ml 30 ml Elution Buffer 10 ml 20 ml 2ml Collection Tubes 50 250 User Manual 1 1 *Buffer GB contains chaotropic salts. Wear gloves and use protective eyewear when handling this solution. Buffer GB may form precipitates under cool ambient condition. Warm up the buffer at 37°C to dissolve before use.

Read more less

Extracting and purification of DNA fragment from agarose gels or enzymatic reactions (such as PCR). Kit Contents: SKU DC01-01 DC01-02 DNA mini Columns 50 250 Buffer GB* 30 ml 130 ml DNA Wash Buffer (Concentrate) 12 ml 54 ml Column Buffer 6 ml 30 ml Elution Buffer 10 ml 20 ml 2ml Collection Tubes 50 250 User Manual 1 1 *Buffer GB contains chaotropic salts. Wear gloves and use protective eyewear when handling this solution. Buffer GB may form precipitates under cool ambient condition. Warm up the buffer at 37°C to dissolve before use.

Read more less

Dual-plate structure, compatible with BVE-4 electrophoresis system. The electrophoresis tank is molded from high-transparency polycarbonate in a single injection process, featuring corrosion resistance, high transparency, and product stability. The transfer clip have clearly marked positive and negative poles, equipped with handles for convenient operation. High blotting efficiency, with a blotting time of approximately 20~40 minutes.Structurally stable materials allow for simultaneous ice bath cooling to prevent overheating interference and ensure reliable experimental results. Capable of blotting four membranes simultaneously. Blotting membrane size: 75x100mm Gel Size 1-4 Gel Size 83 X 73mm External Dimensions 140 x 180 x 185mm Comb Specifications 1.0 mm : 11 teeth / 15 teeth 1.5mm: 11 teeth / 15 teeth  0.75 mm: 11 teeth / 15 teeth Maximum Buffer Capacity  

Read more less

Genie AC Pack is designed as pre-purification pack for Genie water system to remove free chlorine from tap water. This protects the reverse osmosis (RO) membrane against chlorine oxidation. Purification Technologies Activated carbon for free chlorine reduction and bacteriostatic protection Technical Specifications Burst pressure ≥20bar Flow rate  ≥2L/min（Feed pressure ≥ 2 bar） Height 393.8mm Diameter φ90mm   Suitable for Genie water systems Genie G Genie U Genie E Genie R

Read more less

Genie Cleaning Pack used as cleaning pack for Genie water system to clean RO membrane. Suitable for Genie water systems: Genie G Genie U Genie A Genie E Genie R

Read more less

Suitable for the following Rephile System: Genie G Genie U Genie A Genie E Genie R Genie PURIST

Read more less

Genie E Set Feed: tap water Product: Type II Water System includes  Main system  Control Console  RO membrane(s)  Genie Cleaning Pack  30L tank and vent filter  UV preinstalled  Two cartridges   Leak protector  Dispensers are optional. Feed Water Requirements Tap Water Municipal water, Conductivity < 2000 μS/cm (1000 ppm) Operating temperature 5 – 35 ℃ Feed water pressure 1 – 6 bar psi (15 – 90) Water Flow Rate EDI water production rate (@ 25℃) 5 L/hr Water dispensing rate Up to 2.0 L/min Product Water Quality RO rejection 97 to 98% ionic rejection (new RO cartridge)> 99% organic rejection> 99% particulates & bacteria rejection Water resistivity (@ 25℃) > 5 MΩ·cm (typically 10 – 16 MΩ·cm) TOC* < 30 ppb Product Water Quality Stored in Tank ( for tank recirculation models ) Resistivity (＠25℃) > 1 MΩ·cm (default), adjustable Dimensions   Main system dimensionsWidth × depth × height   32 × 44 × 54 cm  (12.6 × 17.3 × 21.3 in) Dispenser dimensions Width × depth × height 21 × 29 × 61 cm (8.3 × 11.4 × 24.0 in) Weight 20 kg Input Voltage 110 – 240 VAC Operating Voltage 24 VDC Main system power < 200 W *Product water quality may vary due to local feed water conditions.

Read more less

Genie G Set Feed: tap water Product: Type II water and Type I System includes Main system with TOC Control Console One Dispenser RO membrane(s) UV preinstalled Three cartridges and a 0.2 um final filter 30L tank  Tank vent filter Leak protector More dispensers are optional Feed Water Requirements Tap Water Municipal water, Conductivity < 2000 μS/cm (1000 ppm) Operating temperature 5 – 35 ℃ Feed water pressure 1 – 6 bar (15 – 90 psi) Water Flow Rate EDI water production rate (@ 25℃) 5, 10, 15 L/hr EDI water dispensing rate Up to 2.0 L/min Ultrapure water dispensing rate Up to 2.0 L/min Product Water Quality RO rejection 97 to 98% ionic rejection (new RO cartridge)> 99% organic rejection> 99% particulates & bacteria rejection EDI water resistivity (@ 25℃) > 5 MΩ·cm (typically 10 – 16 MΩ·cm) EDI water TOC* < 30 ppb Ultrapure water resistivity (@ 25℃) 18.2 MΩ·cm Ultrapure water TOC* < 2 ppb Particles in ultrapure water ( > 0.2 μm) No particles (with a 0.2 μm final filter or RephiBio filter) Microorganisms in ultrapure water < 0.001 cfu/ml (with a 0.2 μm final filter or RephiBio filter) Pyrogens in ultrapure water < 0.001 Eu/ml (with a RephiBio filter) RNase in ultrapure water < 0.5 pg/ml (with a RephiBio filter) DNase in ultrapure water <10 pg/ml (with a RephiBio filter) Product Water Quality Stored in Tank ( for tank recirculation models ) Resistivity (＠25℃) > 1 MΩ·cm (default), adjustable Dimensions   Main system dimensionsWidth × depth × height   32 × 44 × 54 cm (12.6 × 17.3 × 21.3 in) Dispenser dimensions Width × depth × height 21 × 29 × 61 cm (8.3 × 11.4 × 24.0 in) Weight 20 kg Input Voltage 110 – 240 VAC Operating Voltage 24 VDC *In the appropriate operating conditions, otherwise typically ≤5 ppb.

Read more less

Genie H Pack is high-purification pack for Genie water system to remove ionic impurities from water. Purification Technologies:  Ion-exchange resins for removing ionic contaminants Suitable for Genie water systems: Genie U Genie PURIST

Read more less