RephiDuo U Pack RR600Q201 is designed for removing ionic and organic contaminants below trace level to match the water quality required for your application. (Dispense filter not included) Catalog No.: RR600Q201 Specifications: Height: 331 mm Package Dimensions & Gross Weight Length X Depth X Height (mm): 460 X 220 X 130 Gross Weight (kg): 2.6 Suitable for the following water systems: Direct-Pure Genie Direct-Pure UP Direct-Pure adept PURIST Pro

Read more less

RephiDuo U Pack with a 0.2 µm final filter Specifications: Height: 331 mm With a 0.2 μm final filter Package Dimensions & Gross Weight Length X Depth X Height (mm): 0.022m3 Gross Weight (kgs): 4.60 Suitable for the following water systems: Direct-Pure Genie Direct-Pure UP Direct-Pure adept PURIST Pro

Read more less

(Dispense Filter not included) Specifications: Height: 331 mm Low TOC Package Dimensions & Gross Weight Length X Depth X Height (mm): 460 X 220 X 130 Gross Weight (kg): 2.6 Suitable for the following water systems: Direct-Pure Genie Direct-Pure UP Direct-Pure adept PURIST Pro

Read more less

RephiSolo S Pack, replace SPR00S001 is designed to remove most of large particles, organic compounds and chlorine to protect the RO membranes which removes 95-99% of ions and more than 99% of large molecules, microorganisms and particles. Specifications: Burst pressure: ≥15 bar Flow rate: ≥2 L/min (Feed pressure ≥ 2 bar) Height: 321 mm Package Dimensions & Gross Weight: Length X Depth X Height (mm): 460X130X30 Gross Weight (kg): 1.50 Suitable for the following Millipore systems: RiOs 3(SMART) Disclaimer third parties: All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. All specifications are subject to change without notice. MILLIPORE and SMART are trademarks of Merck KGaA, Darmstadt Germany.

Read more less

This product is designed to remove most of large particles, organic compounds and chlorine to protect the RO membranes. RephiLe Catalog No.: RRSPR00A1Millipore Catalog No.: SPR00SIA1 RephiDuo S Pack, replace SPR00SIA1 is designed to remove most of large particles, organic compounds and chlorine to protect the RO membranes which removes 95-99% of ions and more than 99% of large molecules, microorganisms and particles. Then pure water comes out from RO membranes and enters into Ion Exchange Resin to thoroughly remove ions and organics to produce ultrapure water. Specifications: Burst pressure: ≥15 bar Flow rate: ≥2 L/min（Feed pressure ≥ 2 bar） Height: 321 mm Suitable for the following Millipore systems: Direct-Q 3 (SMART) Disclaimer third parties: All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. All specifications are subject to change without notice. MILLIPORE and SMART are trademarks of Merck KGaA, Darmstadt Germany.

Read more less

This product is designed to remove most of large particles, organic compounds and chlorine to protect the RO membranes. RephiLe Catalog No.: RRSPR00A2Millipore Catalog No.: SPR00SIA2 RephiDuo S Pack, replace SPR00SIA2 is designed to remove most of large particles, organic compounds and chlorine to protect the RO membranes which removes 95-99% of ions and more than 99% of large molecules, microorganisms and particles. Then pure water comes out from RO membranes and enters into Ion Exchange Resin to thoroughly remove ions and organics to produce ultrapure water. Specifications: Burst pressure: ≥15 bar Flow rate: ≥2 L/min（Feed pressure ≥ 2 bar） Height: 321 mm Suitable for the following Millipore systems: RiOs DI (SMART) Disclaimer third parties: All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. All specifications are subject to change without notice. MILLIPORE and SMART are trademarks of Merck KGaA, Darmstadt Germany.

Read more less

This product is designed to remove most of large particles, organic compounds and chlorine to protect the RO membranes which removes 95-99% of ions and more than 99% of large molecules, microorganisms and particles. RephiLe Catalog No.: RRSPR0801Millipore Catalog No.: SPR08S001 RephiSolo S Pack, replace SPR08S001 is designed to remove most of large particles, organic compounds and chlorine to protect the RO membranes which removes 95-99% of ions and more than 99% of large molecules, microorganisms and particles. Specifications: Burst pressure: ≥15 bar Flow rate: ≥2 L/min (Feed pressure ≥ 2 bar) Height: 321 mm Suitable for the following Millipore systems: RiOs 8(SMART) Disclaimer third parties: All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. All specifications are subject to change without notice. MILLIPORE and SMART are trademarks of Merck KGaA, Darmstadt Germany.

Read more less

This product is designed to remove most of large particles, organic compounds and chlorine to protect the RO membranes which removes 95-99% of ions and more than 99% of large molecules, microorganisms and particles. RephiLe Catalog No.: RRSPR08A1Millipore Catalog No.: SPR08SIA1 RephiDuo S Pack, replace SPR08SIA1 is designed to remove most of large particles, organic compounds and chlorine to protect the RO membranes which removes 95-99% of ions and more than 99% of large molecules, microorganisms and particles. Then pure water comes out from RO membranes and enters into Ion Exchange Resin to thoroughly remove ions and organics to produce ultrapure water. Specifications: Burst pressure: ≥15 bar Flow rate: ≥2 L/min（Feed pressure ≥ 2 bar） Height: 321 mm Suitable for the following Millipore systems: Direct-Q 8 (SMART) Disclaimer third parties: All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. All specifications are subject to change without notice. MILLIPORE and SMART are trademarks of Merck KGaA, Darmstadt Germany.

Read more less

This product is designed to remove most of large particles, organic compounds and chlorine to protect the RO membranes. RephiLe Catalog No.: RRSPR0L01Millipore Catalog No.: SPR0LS001 RephiSolo S Pack, replace SPR0LS001 is designed to remove most of large particles, organic compounds and chlorine to protect the RO membranes which removes 95-99% of ions and more than 99% of large molecules, microorganisms and particles. Specifications: Burst pressure: ≥15 bar Flow rate: ≥2 L/min (Feed pressure ≥ 2 bar) Height: 321 mm Suitable for the following Millipore systems: RiOs 5(SMART) Disclaimer third parties: All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. All specifications are subject to change without notice. MILLIPORE and SMART are trademarks of Merck KGaA, Darmstadt Germany.

Read more less

This product is designed to remove most of large particles, organic compounds and chlorine to protect the RO membranes. RephiLe Catalog No.: RRSPR0LA1Millipore Catalog No.: SPR0LSIA1 RephiDuo S Pack, replace SPR0LSIA1 is designed to remove most of large particles, organic compounds and chlorine to protect the RO membranes which removes 95-99% of ions and more than 99% of large molecules, microorganisms and particles. Then pure water comes out from RO membranes and enters into Ion Exchange Resin to thoroughly remove ions and organics to produce ultrapure water. Specifications: Burst pressure: ≥15 bar Flow rate: ≥2 L/min (Feed pressure ≥ 2 bar) Height: 321 mm Suitable for the following Millipore systems: Direct-Q 5(SMART) Disclaimer third parties: All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. All specifications are subject to change without notice. MILLIPORE and SMART are trademarks of Merck KGaA, Darmstadt Germany.

Read more less

Most lab water systems require the inlet water pressure to be less than 60 psi (0.4 MPa). For pure to ultrapure water system, water inlet pressure is better below 4 psi (0.03 MPa). This device is used to reduce inlet water pressure to a lower setting. Connecting with 8mm OD tubings. Parameters: Dimensions: 80mm (wide) x 90mm (high) Weight: 200g Inlet Diameter: 5/16 in (8mm) Oulet Diameter: 5/16 in (8mm) Meter Pressure Range: 0.05-.035 MPa (0.5-3.5 bar) Maximum Ajustable Pressure: 0.35 MPa (3.5 bar) Maximum Tolerable Pressure: 1.0 MPa (10 bar) Wall mount: Wall-mountable  Suitable for the following Millipore systems: Milli-Q Acamedic Milli-Q Biocel Milli-Q Gradiant Milli-Q Synthesis Milli-Q Plus Milli-Q Advantage A10 Milli-Q Reference Synergy Disclaimer third parties: All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. All specifications are subject to change without notice. MILLIPORE, MILLI-Q, DIRECT-Q, SIMPLICITY, SYNERGY and ELIX are trademarks of Merck KGaA, Darmstadt Germany.

Read more less