Enhance your laboratory workflow with these Non-sterile Self-locking TC Filters designed for electric pipette controllers. Each pack contains five filters that provide a reliable seal and prevent contamination, ensuring precise and safe liquid handling. The self-locking design offers secure attachment and easy replacement, optimizing performance in demanding lab environments. Ideal for maintaining the integrity of your samples during repetitive pipetting tasks. Fits Drummond and DLab electric pipettor controller models.

Read more less

Features Nuclease-free Water (not DEPC-treated) is ultrapure water with  RNase, DNase and Protease removed by filtration It is ready to use and requires no preparation, mixing, or autoclaving No toxic agents, such as DEPC, are used in the manufacturing, eliminating DEPC interference of enzymatic reactions. 

Read more less

NuZar AC Pack is designed as pre-purification pack for NuZar water purification systems to remove free chlorine from tap water. This protects the reverse osmosis (RO) membrane against chlorine oxidation. Purification Technologies: Activated carbon for free chlorine reduction and bacteriostatic protection Technical Specifications: Burst pressure ≥20bar Flow rate  ≥2L/min (Feed pressure ≥ 2 bar) Height 393.8mm Diameter φ90mm Suitable for water systems: NuZar water system set, E10

Read more less

NuZar H Pack is a high-purification pack for NuZar water purification system to remove ionic impurities from water.  Purification Technologies: Ion-exchange resins for removing ionic contaminants Technical Specifications: Burst pressure ≥20bar Flow rate  ≥2L/min (Feed pressure ≥ 2 bar) Height 393.8mm Diameter φ90mm   Suitable for water systems: NuZar water system set, U24 NuZar water system set, Q NuZar water system set, H24

Read more less

NuZar P Pack is designed to remove particles, organic compounds and free chlorine from tap water for NuZar water purification systems. This protects the reverse osmosis (RO) membrane against mineral scaling, organic fouling and chlorine oxidation. Purification Technologies: Polyphosphate for anti-scaling protection Activated carbon for free chlorine reduction and bacteriostatic protection Depth-filtration for particles removal Technical Specifications: Burst pressure ≥20bar Flow rate  ≥2L/min (Feed pressure ≥ 2 bar) Height 393.8mm Diameter φ90mm Suitable for water systems: NuZar water system set, U24 NuZar water system set, E10 NuZar water system set, H24 NuZar water system set, R24 NuZar water system set, C24

Read more less

NuZar water system set, Q Lite produces ultrapure water (Type I water) from RO, distilled or deionized water. Quality of ultrapure water meets or exceeds ASTM, CLSI, CAP, and ISO Type I water standards. The NuZar water purification systems are compact and powerful. They are specifically designed for laboratories that demand a balance between cost of ownership and exceeding their purified water requirements. The system is CE/RoHS certified. RephiLe provides full documents support to meet user's GMP, GSP, GAP, GCP, GLP requirements. General Specifications Operating voltage 24 VDC Input voltage 100 – 240 VAC Main system power < 190 W Feed Water Requirements Feed water EDI water RO water Distilled water Deionized water Operating temperature 5 – 35 °C Feed water pressure 0 – 1 bar (0 – 15 psi)* Product Water Quality Ultrapure water dispensing rate Up to 2 L/min Ultrapure water resistivity (@25°C) 18.2 MΩ­·cm Ultrapure water TOC < 5 ppb** Particles in ultrapure water No Particles with size > 0.22 μm (with a 0.2 μm final filter or RephiBio filter) Microorganisms in ultrapure water < 0.001 cfu/ml (with a 0.2 μm final filter or RephiBio filter) Pyrogens (endotoxins) in ultrapure water < 0.001 Eu/ml (with a RephiBio filter) RNase in ultrapure water < 0.5 pg/ml (with a RephiBio filter) DNase in ultrapure water < 10 pg/ml (with a RephiBio filter) Dimensions Main system dimensionsWidth × depth × height 414 x 310 x 624 mm (16.3 x 12.2 x 24.5 in) Weight (Net approx) 18 kg Weight (Gross approx) 27 kg *It’s recommended to use a pressure regulator if feed water pressure is above 15 psi (1 bar) **When TOC Level of feed water is < 50 ppb.

Read more less

NuZar Q water system set, produces ultrapure water (Type I water) from RO, distilled or deionized water. Quality of ultrapure water meets or exceeds ASTM, CLSI, CAP, and ISO Type I water standards. The NuZar water purification systems are compact and powerful. They are specifically designed for laboratories that demand a balance between cost of ownership and exceeding their purified water requirements. The system is CE/RoHS certified. RephiLe provides full documents support to meet user's GMP, GSP, GAP, GCP, GLP requirements..   General Specifications Operating voltage 24 VDC Input voltage 100 – 240 VAC Main system power < 190 W Feed Water Requirements Feed water EDI water RO water Distilled water Deionized water Operating temperature 5 – 35 °C Feed water pressure 0 – 1 bar (0 – 15 psi)* Product Water Quality Ultrapure water dispensing rate Up to 2 L/min Ultrapure water resistivity (@25°C) 18.2 MΩ­·cm Ultrapure water TOC < 5 ppb** Particles in ultrapure water No Particles with size > 0.22 μm (with a 0.2 μm final filter or RephiBio filter) Microorganisms in ultrapure water < 0.001 cfu/ml (with a 0.2 μm final filter or RephiBio filter) Pyrogens (endotoxins) in ultrapure water < 0.001 Eu/ml (with a RephiBio filter) RNase in ultrapure water < 0.5 pg/ml (with a RephiBio filter) DNase in ultrapure water < 10 pg/ml (with a RephiBio filter) Dimensions Main system dimensionsWidth × depth × height 414 x 310 x 624 mm (16.3 x 12.2 x 24.5 in) Weight (Net approx) 18 kg Weight (Gross approx) 27 kg *It’s recommended to use a pressure regulator if feed water pressure is above 15 psi (1 bar) **When TOC Level of feed water is < 50 ppb. System includes: Main system UV preinstalled NuZar H and U Pack cartridges and a final filter

Read more less

NuZar water system set, R24 produces reverse osmosis (RO) water from tap water directly. It offers desired solutions for research professionals who work with varieties of applications utilizing RO pure water in the lab. The NuZar water purification systems are compact and powerful. They are specifically designed for laboratories that demand a balance between cost of ownership and exceeding their purified water requirements. The system is CE/RoHS certified. RephiLe provides full documents support to meet user’s GMP, GSP, GAP, GCP, GLP requirements. General Specifications Operating voltage 24 VDC Input voltage 100 – 240 VAC Main system power < 190 W Feed Water Requirements Feed water Tap water Feed water conductivity / TDS < 2000 μS/cm / < 1000 ppm Operating temperature 5 – 35 °C Feed water pressure 1 – 6 bar (15 – 90 psi) Product Water Quality RO production rate 24 L/hr RO water dispensing rate Up to 2 L/min RO water Conductivity  (@25°C) Typically < 20 μS/cm RO rejection 97 to 98% ionic rejection (new RO cartridge)   > 99% organic rejection > 99% particulates & bacteria rejection Dimensions & Weight  Main system dimensions Width × depth × height  w/ integrated tank 32 × 44 × 54 cm  (12.6 × 17.3 × 21.3 in) Weight (Approx Net) 19 kg Weight (Approx Gross) 28 kg

Read more less

NuZar RO Pack is designed to reduce most of the ions, organic carbons and particulates. Purification Technologies: Reverse Osmosis Technical Specifications: Burst pressure ≥20bar Flow rate  ≥16 L/min (Feed pressure ≥ 3.4 bar) ≥24 L/min (Feed pressure ≥ 3.4 bar) Height 393.8mm Diameter φ90mm   Suitable for water systems: NuZar water system set, U24 NuZar water system set, E10 NuZar water system set, H24 NuZar water system set, R24 NuZar water system set, C24

Read more less

NuZar U Light water system set, produces ultrapure water (Type I water) and RO water from tap water directly. Quality of ultrapure water meets or exceeds ASTM, CLSI, CAP, and ISO Type I water standards. The NuZar water purification systems are compact and powerful. They are specifically designed for laboratories that demand a balance between cost of ownership and exceeding their purified water requirements. The system is CE/RoHS certified. RephiLe provides full documents support to meet user's GMP, GSP, GAP, GCP, GLP requirements. General Specifications Operating voltage 24 VDC Input voltage 100 – 240 VAC Main system power < 190 W Feed Water Requirements Feed water Tap water Feed water conductivity / TDS < 2000 μS/cm/ < 1000 ppm Operating temperature 5 – 35 °C Feed water pressure 1 – 6 bar psi (15 – 90) Product Water Quality Ultrapure water dispensing rate Up to 2 L/min Ultrapure water resistivity (@25°C) 18.2 MΩ­·cm Ultrapure water TOC < 5 ppb* Particles in ultrapure water No Particles with size > 0.22 μm (with a 0.2 μm final filter or RephiBio filter) Microorganisms in ultrapure water < 0.001 cfu/ml (with a 0.2 μm final filter or RephiBio filter) Pyrogens (endotoxins) in ultrapure water < 0.001 Eu/ml (with a RephiBio filter) RNase in ultrapure water < 0.5 pg/ml (with a RephiBio filter) DNase in ultrapure water < 10 pg/ml (with a RephiBio filter) RO production rate 24 L/hr RO water dispensing rate Up to 2 L/min RO water conductivity  (@25°C) Typically < 20 μS/cm RO rejection 97 to 98% ionic rejection (new RO cartridge)> 99% organic rejection> 99% particulates & bacteria rejection Dimensions Main system dimensionsWidth × depth × height w/ 10L tank 491 x 422 x 624 mm (19.3 x 16.6 x 24.5 in) Main system dimensionsWidth × depth × height w/o 10L tank 491 x 310 x 624 mm (19.3 x 12.2 x 24.5 in) Dispenser dimensions Width × depth × height 21 × 29 × 61 cm (8.3 × 11.4 × 24.0 in) Weight (Net approx) 21 kg Weight (Gross approx) 30 kg *When TOC Level of feed water is < 50 ppb. System includes Main system RO membrane UV preinstalled NuZar P, H and U Pack cartridges and a 0.2 um final filter Cleaning Pack 10L tank and tank sanitization module preinstalled Tank vent filter RATANKVN1 Leak sensor

Read more less

NuZar U Pack is designed for NuZar water purification systems to remove ionic and organic contaminants below trace level to match the water quality required. Purification Technologies: Ion-exchange resins for removing trace level ionic contaminants Activated carbon for trace level of organic contaminants Technical Specifications: Burst pressure ≥20bar Flow rate  ≥2L/min (Feed pressure ≥ 2 bar) Height 393.8mm Diameter φ90mm   Suitable for water systems: NuZar water system set, U24 NuZar water system set, Q

Read more less

NuZar U24 water system set, produces ultrapure water (Type I water) and RO water from tap water directly. Quality of ultrapure water meets or exceeds ASTM, CLSI, CAP, and ISO Type I water standards. The NuZar water purification systems are compact and powerful. They are specifically designed for laboratories that demand a balance between cost of ownership and exceeding their purified water requirements. The system is CE/RoHS certified. RephiLe provides full documents support to meet user’s GMP, GSP, GAP, GCP, GLP requirements. General Specifications Operating voltage 24 VDC Input voltage 100 – 240 VAC Main system power < 190 W Feed Water Requirements Feed water Tap water Feed water conductivity / TDS < 2000 μS/cm/ < 1000 ppm Operating temperature 5 – 35 °C Feed water pressure 1 – 6 bar psi (15 – 90) Product Water Quality Ultrapure water dispensing rate Up to 2 L/min Ultrapure water resistivity (@25°C) 18.2 MΩ­·cm Ultrapure water TOC < 5 ppb* Particles in ultrapure water No Particles with size > 0.22 μm (with a 0.2 μm final filter or RephiBio filter) Microorganisms in ultrapure water < 0.001 cfu/ml (with a 0.2 μm final filter or RephiBio filter) Pyrogens (endotoxins) in ultrapure water < 0.001 Eu/ml (with a RephiBio filter) RNase in ultrapure water < 0.5 pg/ml (with a RephiBio filter) DNase in ultrapure water < 10 pg/ml (with a RephiBio filter) RO production rate 24L/hr RO water dispensing rate Up to 2 L/min RO water conductivity  (@25°C) Typically < 20 μS/cm RO rejection 97 to 98% ionic rejection (new RO cartridge)> 99% organic rejection> 99% particulates & bacteria rejection Dimensions Main system dimensionsWidth × depth × height w/ 10L tank 491 x 422 x 624 mm (19.3 x 16.6 x 24.5 in) Main system dimensionsWidth × depth × height w/o 10L tank 491 x 310 x 624 mm (19.3 x 12.2 x 24.5 in) Dispenser dimensions Width × depth × height 21 × 29 × 61 cm (8.3 × 11.4 × 24.0 in) Weight (Net approx) 21 kg Weight (Gross approx) 30 kg *When TOC Level of feed water is < 50 ppb. System includes Main system RO membrane UV preinstalled NuZar P, H and U Pack cartridges and a 0.2 um final filter Cleaning Pack 10L tank preinstalled Tank vent filter RATANKVN7 Leak sensor

Read more less