The 1kB Plus DNA Ladder is a ready-to-use DNA ladder, which is pre-mixed with loading dye for direct loading on gel. The DNA ladder is composed of 13 individual DNA fragments: 10k, 8k, 6k, 5k, 4k, 3k, 2.5k, 2k, 1.5k, 1k, 750, 500, and 250 bp derived from a mixture of PCR products and specifically digested plasmid DNA. This product contains two enhanced bands (3 kb and 1 kb) for easy referencing. In addition, two tracking dyes, Xylene cyanol FF and Bromophenol blue which mimic the migration of 4,000 bp and 500 bp dsDNA during electrophoresis are also added for real time monitoring.  Source Phenol extracted PCR products and dsDNA digested with specific restriction enzymes, equilibrated in 10 mM Tris-HCl (pH 8.0) and 10 mM EDTA.  Range 250 ~ 10,000 bp  Concentration 50 µg/ 500 µl  Recommended loading volume 5 µl/ well  Storage Protected from light Room temperature ≥ 6 months 4°C ≥ 12 months -20°C ≥ 36 months

Read more less

The 1kB Plus DNA Ladder is a ready-to-use DNA ladder, which is pre-mixed with loading dye for direct loading on gel. The DNA ladder is composed of 13 individual DNA fragments: 10k, 8k, 6k, 5k, 4k, 3k, 2.5k, 2k, 1.5k, 1k, 750, 500, and 250 bp derived from a mixture of PCR products and specifically digested plasmid DNA. This product contains two enhanced bands (3 kb and 1 kb) for easy referencing. In addition, two tracking dyes, Xylene cyanol FF and Bromophenol blue which mimic the migration of 4,000 bp and 500 bp dsDNA during electrophoresis are also added for real time monitoring.  Source Phenol extracted PCR products and dsDNA digested with specific restriction enzymes, equilibrated in 10 mM Tris-HCl (pH 8.0) and 10 mM EDTA.  Range 250 ~ 10,000 bp  Concentration 50 µg/ 500 µl  Recommended loading volume 5 µl/ well  Storage Protected from light Room temperature ≥ 6 months 4°C ≥ 12 months -20°C ≥ 36 months

Read more less

The 1kB Plus DNA Ladder is a ready-to-use DNA ladder, which is pre-mixed with loading dye for direct loading on gel. The DNA ladder is composed of 13 individual DNA fragments: 10k, 8k, 6k, 5k, 4k, 3k, 2.5k, 2k, 1.5k, 1k, 750, 500, and 250 bp derived from a mixture of PCR products and specifically digested plasmid DNA. This product contains two enhanced bands (3 kb and 1 kb) for easy referencing. In addition, two tracking dyes, Xylene cyanol FF and Bromophenol blue which mimic the migration of 4,000 bp and 500 bp dsDNA during electrophoresis are also added for real time monitoring.  Source Phenol extracted PCR products and dsDNA digested with specific restriction enzymes, equilibrated in 10 mM Tris-HCl (pH 8.0) and 10 mM EDTA.  Range 250 ~ 10,000 bp  Concentration 50 µg/ 500 µl  Recommended loading volume 5 µl/ well  Storage Protected from light Room temperature ≥ 6 months 4°C ≥ 12 months -20°C ≥ 36 months

Read more less

The 1kB Plus DNA Ladder is a ready-to-use DNA ladder, which is pre-mixed with loading dye for direct loading on gel. The DNA ladder is composed of 13 individual DNA fragments: 10k, 8k, 6k, 5k, 4k, 3k, 2.5k, 2k, 1.5k, 1k, 750, 500, and 250 bp derived from a mixture of PCR products and specifically digested plasmid DNA. This product contains two enhanced bands (3 kb and 1 kb) for easy referencing. In addition, two tracking dyes, Xylene cyanol FF and Bromophenol blue which mimic the migration of 4,000 bp and 500 bp dsDNA during electrophoresis are also added for real time monitoring.  Source Phenol extracted PCR products and dsDNA digested with specific restriction enzymes, equilibrated in 10 mM Tris-HCl (pH 8.0) and 10 mM EDTA.  Range 250 ~ 10,000 bp  Concentration 50 µg/ 500 µl  Recommended loading volume 5 µl/ well  Storage Protected from light Room temperature ≥ 6 months 4°C ≥ 12 months -20°C ≥ 36 months

Read more less

Labels per case: 2160 Rolls Per Case: 3 rolls Color: White to Black Size: 1" Material: Autoclave Tape Adhesive: Removable

Read more less

The paper tapes are ideal for general laboratory use, and is excellent for applications in refrigeration. Sticks to virtually any surface. Can be written on with pencil, fiber-tip or ball point pen, and lab markers. Can withstand temperatures from -23 to 121°C (-10 to 250°F) and has an application temperature as low as 0°C (32°F). Vinyl-coated, soft satin-finish The adhesive backing will peel off easily and leaves no residue Rainbow packs contain blue, green, orange, pink, red, yellow, and white tape.

Read more less

Introduction High flow rates and flux Low protein binding and low chemical extractability. Pore size: 0.22 μm. Non-Pyrogenic, DNase/RNase free. Sterilized by E-beam, SAL=10-6. Individually packaged in sterile bag. No endotoxin, no pyrogen. For laboratory use only. If the package is damaged, please do not use. Warning Do not use plastic bottles, glass bottles, flasks or containers that are not designed for filtration and cannot withstand negative pressure to connect to the upper cup . Not suitable for culture flasks larger than 2L. Working temperature: 4-37°C. Working pressure: 0.03-0.06Mpa, if there is foam, please reduce pressure appropriately. Tighten the upper cup and bottle mouth by hand, but do not over tighten. Personal protective equipment must be used at all times, and goggles must be worn when using vacuum equipment. Work on the aseptic operating table. It is not recommended to recycle any hazardous substances, hazardous substances, wastes or biochemically hazardous materials.

Read more less

Introduction High flow rates and flux Low protein binding and low chemical extractability. Pore size: 0.22 μm. Non-Pyrogenic, DNase/RNase free. Sterilized by E-beam, SAL=10-6. Individually packaged in sterile bag. No endotoxin, no pyrogen. For laboratory use only. If the package is damaged, please do not use. Warning Do not use plastic bottles, glass bottles, flasks or containers that are not designed for filtration and cannot withstand negative pressure to connect to the upper cup . Not suitable for culture flasks larger than 2L. Working temperature: 4-37°C. Working pressure: 0.03-0.06Mpa, if there is foam, please reduce pressure appropriately. Tighten the upper cup and bottle mouth by hand, but do not over tighten. Personal protective equipment must be used at all times, and goggles must be worn when using vacuum equipment. Work on the aseptic operating table. It is not recommended to recycle any hazardous substances, hazardous substances, wastes or biochemically hazardous materials.

Read more less

Bioland vacuum filter and bottle top filters are ideal labware consumables for filtering cell culture media, biological fluids and aqueous solution. Filter system are manufactured from raw materials of high transparency polystyrene in four different volumes: 150ml, 250 ml, 500ml and 1000 ml. The system consists of a bottle top filter with blue PE adapter and a solution bottle. Lid should be removed from bottle top filter before pouring media into bottle to filter impurities. Meanwhile, closing lid on bottle is necessary for prevent contamination when not in use. Clear graduation is graved both on top filter and solution bottle to help users to adjust media volume. PES is current available membrane in top filter with pore size of 0.22 um. All tissue culture dishes are packaged in bags with sterilization, RNase-free, DNase-free and Non-pyrogenic. Pore size: 0.22 um Fits 45mm Bottle neck

Read more less

DescriptionMES is used as a buffering agent in biology and biochemistry. It is utilized for resolving very small proteins on bis-tris gels. It is mainly used as a biological buffer in plant cell cultures. Buffer solutions are used as a means of keeping pH at a nearly constant value in a wide variety of chemical applications.All components are dissolved in ultrapure water, followed by pH adjustment and filtered through 0.22 micron filter.MSDS 

Read more less

DescriptionMES is used as a buffering agent in biology and biochemistry. It is utilized for resolving very small proteins on bis-tris gels. It is mainly used as a biological buffer in plant cell cultures. Buffer solutions are used as a means of keeping pH at a nearly constant value in a wide variety of chemical applications.All components are dissolved in ultrapure water, followed by pH adjustment and filtered through 0.22 micron filter.MSDS 

Read more less

Features: USP VI Polypropylene material Round well; V-bottom, High chemical stability; Temperature range: -80°C to 120°C Autoclavable Centrifugal strength up to 3000g Compatible with multi-channel pipette and automatic equipment Optimized bottom design to minimize residual volume Clear alphanumeric codes for easy identification Conform to SBS/ ANSI Specific 96 well deep plate used in nucleic acid extraction Stackable, reliable tight sealing Non-pryogenic, DNase/RNase free

Read more less