Made of polypropylene for chemical resistance and greater strength Sterile  RNase, DNase, DNA, Endotoxin - Free The maximum centrifuge speed:15,000xg 1ml graduation increment 16x64 mm

Read more less

Made of polypropylene for chemical resistance and greater strength. Sterile; RNase, DNase, DNA, Endotoxin-Free The maximum centrifuge speed: 9,500g Light green cap for easier labeling White graduation: 5 ml to 50ml, 2.5ml increment Cap color: Light blue or white

Read more less

Made of polypropylene for chemical resistance and greater strength. Sterile; RNase, DNase, DNA, Endotoxin-Free The maximum centrifuge speed: 9,500g White graduation: 5 ml to 50ml, 2.5ml increment Cap color: light blue or white

Read more less

Introduction High flow rates and flux Low protein binding and low chemical extractability. Pore size: 0.22 μm. Non-Pyrogenic, DNase/Rnase free. Sterilized by E-beam, SAL=10-6. Individually packaged in sterile bag. No endotoxin, no pyrogen. For laboratory use only. If the package is damaged, please do not use. Warning Do not use plastic bottles, glass bottles, flasks or containers that are not designed for filtration and cannot withstand negative pressure to connect to the upper cup . Not suitable for culture flasks larger than 2L. Working temperature: 4-37°C. Working pressure: 0.03-0.06Mpa, if there is foam, please reduce pressure appropriately. Tighten the upper cup and bottle mouth by hand, but do not over tighten. Personal protective equipment must be used at all times, and goggles must be worn when using vacuum equipment. Work on the aseptic operating table. It is not recommended to recycle any hazardous substances, hazardous substances, wastes or biochemically hazardous materials.

Read more less

Made of polypropylene for chemical resistance and greater strength. Sterile; RNase, DNase, DNA, Endotoxin-Free The maximum centrifuge speed: 9,500g Light green cap for easier labeling White graduation: 5 ml to 50ml, 2.5ml increment

Read more less

This rack can hold up to 50 cryogenic vials. With locking system, the vials will securely lock in each well and will not turn. You can easily unscrew a Cryovial cap with one hand. Strong handles make it easy to carry. The rack is compact and stackable. Features Hold up to 50 cryogenic vials made of polypropylene and is autoclavable A locking system at the bottom of each well securely locks the vials in each well  

Read more less

This rack can hold up to 50 cryogenic vials. With bottom locking system, the vials will securely lock in each well and will not turn. You can easily unscrew a Cryovial cap with one hand. Strong handles make it easy to carry. The rack is compact and stackable. Features Hold up to 50 cryogenic vials made of polypropylene and is autoclavable A locking system at the bottom of each well securely locks the vials in each well

Read more less

Sturdy and color pleasant. The rubber holder at the bottom keep samples secure. A Good rack for 15ml conical tubes, 10ml bacteria culture tubes, and many kinds of test tubes.

Read more less

Sturdy and color pleasant. The rubber holder at the bottom keep samples secure. A Good rack for 15ml conical tubes, 10ml bacteria culture tubes, and many kinds of test tubes.

Read more less

Conical bottom centrifuge tubes are made from high-grade polypropylene, in compliance with USP Class VI regulations. Easy to read engraved graduations Max RCF up to 7500×g Autoclavable at 121°C and freezable to −80 °C Leak-proof and latex-free Three years shelf life Manufactured in a class 100,000 clean room environment Centrifuge tubes are available in 250 and 500 ml sizes. Bothth sizes feature a flat seal cap. All caps are made from polyethylene.

Read more less

Applications: Suitable for product packaging and storage requirements in molecular biology and cell biology, laboratory medicine, genomics, proteomics, and other areas. Product Features The raw materials, premium polypropylene (PP, cap)/polyethylene (HDPE, bottle), have excellent physical and chemical indicators and very good pressure-resistance, impact-resistance and acid and alkali resistance. PP materials can undergo autoclave sterilization at 121°C; HDPE can be stored at -80°C. A full range of choices to meet different packaging and storage requirements. Wash-free, no need for tedious pre-cleaning processing work, ready to use, greatly improves the packaging effect of users. Thickened middle packaging to ensure transportation and storage safety. Use of professional leak-proof design for bottle mouth, with no need for inner cover or inner gasket for protection, excellent sealability. 100% leak-proof to ensure safety even during air transportation; wide-mouthed design for easy access of liquid. No biotoxicity, pyrogen-free, DNase/RNase-free, manufactured in a 100-thousand grade clean plant. Sterilized using GAMMA-ray. Introduction of imported digital-controlled production equipment with high precision Fine details and comfortable touch Bottle walls are even with high gloss, with no color difference; high uniformity between different batches.

Read more less

Introduction High flow rates and flux Low protein binding and low chemical extractability. Pore size: 0.22 μm. Non-Pyrogenic, DNase/RNase free. Sterilized by E-beam, SAL=10-6. Individually packaged in sterile bag. No endotoxin, no pyrogen. For laboratory use only. If the package is damaged, please do not use. Warning Do not use plastic bottles, glass bottles, flasks or containers that are not designed for filtration and cannot withstand negative pressure to connect to the upper cup . Not suitable for culture flasks larger than 2L. Working temperature: 4-37°C. Working pressure: 0.03-0.06Mpa, if there is foam, please reduce pressure appropriately. Tighten the upper cup and bottle mouth by hand, but do not over tighten. Personal protective equipment must be used at all times, and goggles must be worn when using vacuum equipment. Work on the aseptic operating table. It is not recommended to recycle any hazardous substances, hazardous substances, wastes or biochemically hazardous materials.

Read more less