This product is designed to remove most of large particles, organic compounds and chlorine to protect the RO membranes. RephiLe Catalog No.: RRSPR0L01Millipore Catalog No.: SPR0LS001 RephiSolo S Pack, replace SPR0LS001 is designed to remove most of large particles, organic compounds and chlorine to protect the RO membranes which removes 95-99% of ions and more than 99% of large molecules, microorganisms and particles. Specifications: Burst pressure: ≥15 bar Flow rate: ≥2 L/min (Feed pressure ≥ 2 bar) Height: 321 mm Suitable for the following Millipore systems: RiOs 5(SMART) Disclaimer third parties: All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. All specifications are subject to change without notice. MILLIPORE and SMART are trademarks of Merck KGaA, Darmstadt Germany.

Read more less

This product is designed to remove most of large particles, organic compounds and chlorine to protect the RO membranes. RephiLe Catalog No.: RRSPR0LA1Millipore Catalog No.: SPR0LSIA1 RephiDuo S Pack, replace SPR0LSIA1 is designed to remove most of large particles, organic compounds and chlorine to protect the RO membranes which removes 95-99% of ions and more than 99% of large molecules, microorganisms and particles. Then pure water comes out from RO membranes and enters into Ion Exchange Resin to thoroughly remove ions and organics to produce ultrapure water. Specifications: Burst pressure: ≥15 bar Flow rate: ≥2 L/min (Feed pressure ≥ 2 bar) Height: 321 mm Suitable for the following Millipore systems: Direct-Q 5(SMART) Disclaimer third parties: All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. All specifications are subject to change without notice. MILLIPORE and SMART are trademarks of Merck KGaA, Darmstadt Germany.

Read more less

This product is designed to remove the ionic and organic contaminants below trace level to match the water quality required for your application. Purification Technologies: Ion-Exchange Activated Carbon Suitable for the following Millipore systems:  Synergy  Synergy UV Disclaimer third parties: All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. All specifications are subject to change without notice. MILLIPORE, MILLI-Q, DIRECT-Q, SIMPLICITY, SYNERGY and ELIX are trademarks of Merck KGaA, Darmstadt Germany.

Read more less

This product is designed to remove ionic and organic contaminants below trace level to match the water quality required for your application. Purification Technologies: Ion-Exchange Activated Carbon Depth Filtration Suitable for the following Millipore systems: Synergy Synergy UV Disclaimer third parties: All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. All specifications are subject to change without notice. MILLIPORE, MILLI-Q, DIRECT-Q, SIMPLICITY, SYNERGY and ELIX are trademarks of Merck KGaA, Darmstadt Germany.

Read more less

This product is designed to reduce ionic and organic contaminants below trace level to match the water quality required for your application.  A 0.2 μm PES capsule filter is included to remove bacteria and particles above 0.2 μm size.  Purification Technologies: Ion-Exchange Activated Carbon Depth Filtration Membrane filtration Suitable for the following Millipore systems: Milli-Q Plus Milli-Q RG Milli-Q UF Plus Milli-Q UV Plus Disclaimer third parties: All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. All specifications are subject to change without notice. MILLIPORE and MILLI-Q are trademarks of Merck KGaA, Darmstadt Germany.

Read more less

This product is designed to reduce ionic and organic contaminants below trace level to match the water quality required for your application. A 0.2 μm PES capsule filter is included to remove bacteria and particles above 0.2 μm size.  Purification Technologies: Ion-Exchange Membrane filtration  Suitable for the following Millipore systems: Alpha-Q Milli-Q Plus Milli-Q RG Milli-Q UF Plus Milli-Q UV Plus Disclaimer third parties: All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. All specifications are subject to change without notice. MILLIPORE, Alphsa-Q and MILLI-Q are trademarks of Merck KGaA, Darmstadt Germany.

Read more less

These products are designed to remove ionic and organic contaminants below trace level to match the water quality required for your application. A 0.2 μm PES capsule filter is included to remove bacteria and particles above 0.2 μm size.  Purification Technologies: Ion-Exchange Activated Carbon Membrane filtration Suitable for the following Millipore systems:  Milli-Q Academic   Milli-Q Biocel   Milli-Q Element   Milli-Q Gradient  Milli-Q Synthesis Disclaimer third parties: All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. All specifications are subject to change without notice. MILLIPORE, MILLI-Q, DIRECT-Q, SIMPLICITY, SYNERGY and ELIX are trademarks of Merck KGaA, Darmstadt Germany.

Read more less

These products are designed to remove ionic and organic contaminants below trace level to match the water quality required for your application. A 0.2 μm PES capsule filter is included to remove bacteria and particles above 0.2 μm size. Purification Technologies: Ion-Exchange Membrane filtration Suitable for the following Millipore systems: Milli-Q Acadamic Milli-Q Biocel Milli-Q Element Milli-Q Gradient Milli-Q Synthesis Disclaimer third parties: All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. All specifications are subject to change without notice. MILLIPORE, MILLI-Q, DIRECT-Q, SIMPLICITY, SYNERGY and ELIX are trademarks of Merck KGaA, Darmstadt Germany.

Read more less

These products are designed to remove ionic and organic contaminants below trace level to match the water quality required for your application. A 0.2 μm capsule filter remove bacteria and particles above 0.2 μm size. Purification Technologies Ion-Exchange Activated Carbon Depth Filtration Membrane Filter Suitable for the following Millipore systems Simplicity  Simplicity 185 Synergy Synergy 185 Disclaimer third parties: All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. All specifications are subject to change without notice. MILLIPORE, MILLI-Q, DIRECT-Q, SIMPLICITY, SYNERGY and ELIX are trademarks of Merck KGaA, Darmstadt Germany.

Read more less

These products are designed to remove ionic and organic contaminants below trace level to match the water quality required for your application. A 0.2 μm capsule filter is included to remove bacteria and particles above 0.2 μm size.  Purification Technologies Ion-Exchange Activated Carbon Membrane Filter Suitable for the following Millipore systems Simplicity  Simplicity 185 Synergy  Synergy 185 Disclaimer third parties: All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. All specifications are subject to change without notice. MILLIPORE, MILLI-Q, DIRECT-Q, SIMPLICITY, SYNERGY and ELIX are trademarks of Merck KGaA, Darmstadt Germany.

Read more less

Most lab water systems require the inlet water pressure to be less than 60 psi (0.4 MPa). For pure to ultrapure water system, water inlet pressure is better below 4 psi (0.03 MPa). This device is used to reduce inlet water pressure to a lower setting. Connecting with 8mm OD tubings. Parameters: Dimensions: 80mm (wide) x 90mm (high) Weight: 200g Inlet Diameter: 5/16 in (8mm) Oulet Diameter: 5/16 in (8mm) Meter Pressure Range: 0.05-.035 MPa (0.5-3.5 bar) Maximum Ajustable Pressure: 0.35 MPa (3.5 bar) Maximum Tolerable Pressure: 1.0 MPa (10 bar) Wall mount: Wall-mountable  Suitable for the following Millipore systems: Milli-Q Acamedic Milli-Q Biocel Milli-Q Gradiant Milli-Q Synthesis Milli-Q Plus Milli-Q Advantage A10 Milli-Q Reference Synergy Disclaimer third parties: All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. All specifications are subject to change without notice. MILLIPORE, MILLI-Q, DIRECT-Q, SIMPLICITY, SYNERGY and ELIX are trademarks of Merck KGaA, Darmstadt Germany.

Read more less

This is a booster pump designed to increase feed water pressure.  Suitable for the following Millipore systems: Elix (UV) 3/5/10 RiOs 5/8/16 Direct-Q 5 Disclaimer third parties: All product and company names are trademarks™ or registered® trademarks of their respective holders. Use of them does not imply any affiliation with or endorsement by them. All specifications are subject to change without notice. MILLIPORE, MILLI-Q, DIRECT-Q, SIMPLICITY, SYNERGY, RiOs and ELIX are trademarks of Merck KGaA, Darmstadt Germany.

Read more less